Keeping up with complexities: blasting 3D-printed parts

By Bernd Busskamp

Sales Director, OEM Air Germany, Wheelabrator

Surfaces are getting more complex. At least that’s what I’ve been seeing in recent years. We’ve adapted to that, developing blast and peening technology that can cope with internal surfaces and organic external topographies. But things are about to get more fiendish still.

At first, it was lightweight design that turned engine blocks into something akin to Swiss cheese – with bores, channels, nooks and crannies. Now it’s the rise of additive manufacturing (AM), the printing of (among other materials) metal parts, that is posing new challenges, adding new complexities and requiring new blast processes.

Why blast 3D-printed parts?

3D-PrintThe additive manufacturing process itself creates its own new cleaning tasks and blast requirements. Powder residue, half sintered-on during the build process, may need removing. Additive manufacturing of metal parts can also result in a relatively rougher surface which then needs polishing.

Another important task is the removal of support structures, printed along with the part to hold it in place. Blasting is a great secondary process for this, removing the more delicate or looser supports.

3D printing processes allow the creation of fine and delicate structures on the workpiece surface directly as part of the build. These fine structures or textures would traditionally be applied after blasting, so if they are already there on the ‘raw’ part, these areas need to be masked carefully to protect them from the blast process.

Complexity inside

By far the biggest challenge from a surface technology perspective, however, is the ability to print parts with complex internal contours – creating internal part topographies that have not previously been possible.

Removing powder residue from surfaces inside incredibly complex cavities requires the latest – or still evolving – blast technology. And it’s not just the blast process itself that is challenging, the part must then also be reliably emptied of debris and blast media. This can be very tricky and has to be thought through and incorporated as part of the design process when developing the blast process for a given 3D printed part.

Blasting in nooks and crannies – the state of the art

Existing methods for internal blasting usually involve airblasting through nozzles mounted on lances that are inserted into the workpiece from the outside.

The latest advances here have resulted in flexible lance designs that emit blast media along the circumference of a very short nozzle head. This enables internal blasting around bends and corners without the risk of lances getting stuck or having to rely on rotation to cover the whole surface area.

Current short and small nozzle head designs can blast cavities of as little as 14 mm diameter. Crucially for 3D-printed parts, these cavities no longer have to have a round cross-section to be reliably covered by the blast media. This new, evolving blast method opens up new possibilities for internal blasting – not just of 3D-printed parts.

Additive Manufacturing is on the rise and any follow-on production steps have to adapt to the specific requirements of printed parts. So far, blast technology is keeping up.

This post was written by

Bernd BusskampBernd Busskamp

Sales Director, OEM Air Germany, Wheelabrator

View biog | View all posts

About WheelabratorBlog

Beneath the surface - expert opinion and insight on surface preparation from Wheelabrator.
This entry was posted in 3D Printing, Abrasive Media, Blast Media, peening and tagged , , , . Bookmark the permalink.

6 Responses to Keeping up with complexities: blasting 3D-printed parts

  1. Geir Vikan says:

    Hello, do you mean 14 mm and not 14 meter in the sentence “Current short and small nozzle head designs can blast cavities of as little as 14 m diameter.” ? Sound strange. Best regards

  2. Pingback: Adding a new dimension to R&D with 3D printing | Wheelabrator Blog

  3. Pachamuthu Sengottaiyan says:

    Great to see Industry 4.0 concept

  4. Len McCreary says:

    The flexible lances are intriguing. What are the most significant limitations of vibratory finishing for complex internal geometries that leave blasting with the advantage?

    • Paul Rawlinson - Technical Director Wheelabrator Vibro says:

      To manufacture preformed media (ceramic or plastic) with accurate dimensions below 2mm is extremely difficult, this is the main reason why the blasting technique can have an advantage over vibratory finishing for internal material removal or surface finishing inside small holes and apertures.

  5. @Geir – thank you for flagging the typo in the blog. You are of course right and we have corrected the error!

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s